F-Secure Management Agent Settings; Changing Settings That Have Been Modified During Installation Or Upgrade - F-SECURE INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61 Administrator's Manual

4.2.4

F-Secure Management Agent Settings

4.2.5 Changing Settings That Have Been Modified During
Installation or Upgrade
For detailed descriptions of F-Secure Content Scanner Server settings,
see "Configuring F-Secure Content Scanner
Use the variables under the F-Secure Management Agent / Settings /
branch to define settings for the F-Secure Management Agent.
For detailed descriptions of F-Secure Management Agent settings, see
"F-Secure Management Agent
If you want to change a setting that has been modified locally during
installation or upgrade, you need to mark the setting as Final in the
restriction editor. The settings descriptions in this manual indicate the
settings for which you need to use the Final restriction. You can also
check in F-Secure Policy Manager Console whether you need to use the
Final restriction for a setting. Do the following:
1. Select the Policy tab and then select the setting you want to check.
2.
Now select the Status tab to see if the setting has been modified
locally.
If the setting is not shown in grayed font in the Status view, then
the product uses the setting from the base policy and therefore
the Final restriction is not needed.
If the setting is shown in normal black font, then the setting has
been modified locally. You must mark the setting as Final when
you change it.
Basics of Using F-Secure Internet Gatekeeper
Server", 211.
Settings", 252.
CHAPTER 4 81