Table of Contents
Advertisement
3.4
After the Installation
3.4.1
Importing Product MIB files to F-Secure Policy Manager
Console
This section describes what you have to do after the installation to take
F-Secure Internet Gatekeeper into use.
If you are using the product in centrally managed mode, there are cases
when the F-Secure Internet Gatekeeper MIB JAR file cannot be uploaded
to F-Secure Policy Manager Server during the installation. In these cases
you will have to import the MIB files to F-Secure Policy Manager. You will
have to import the MIB files if:
F-Secure Internet Gatekeeper is located in a different network
segment than F-Secure Policy Manager, and there is a firewall
between them blocking access to Policy Manager's
administrative port (8080).
F-Secure Policy Manager Server has been configured so that
administrative connections from anywhere else than the localhost
are blocked. This is the default F-Secure Policy Manager Server
configuration.
The recommended way is to import the MIBs via F-Secure Policy
Manager Console's
Tools
JAR file is located on the F-Secure CD in the \software\fsig\mibs\
directory. You can import the MIBs as follows:
1. Open the
Tools
menu and select the
2.
Click Import....
3.
When the Import Installation Packages dialog opens, browse to
locate the fsigk661mib.jar file. Then click Open.
4.
After importing the new MIB files, restart F-Secure Policy Manager
Console.
Another possibility for importing the product MIBs is to run the
imptmib.exe utility from the F-Secure CD.
menu. The F-Secure Internet Gatekeeper MIB
Installation packages...
CHAPTER 3
69
Installation
option.
Advertisement
Table of Contents
