F-SECURE INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61 Administrator's Manual page 212

212
IP address
TCP port
Accept connections
Max connections
Specify the IP address that F-Secure
Content Scanner Server listens to. If you do
not assign any IP address (0.0.0.0),
F-Secure Content Scanner Server responds
to all connections.
Specify the port number that F-Secure
Content Scanner Server listens to for
incoming connections. By default, the port
number is 18971. It is recommended to use
the default port number.
If you change the port number, make sure
that F-Secure Anti-Virus for Internet Mail
uses the same configuration. To change
F-Secure Anti-Virus for Internet Mail
settings, see "Content Scanner
149.
Specify a comma-separated list of F-Secure
Anti-Virus for Internet Mail server IP
addresses from which the server accepts
incoming requests. This setting is used if
F-Secure Anti-Virus for Internet Mail is
installed on a separate machine.
If the list is empty, the server accepts
connections from any host.
Specify the maximum number of
simultaneous connections that F-Secure
Content Scanner Server accepts. If you do
not want to limit the amount of connections,
set the value to zero (0).
Servers",