F-SECURE INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61 Administrator's Manual page 367

ID Severity Trap
Info Module Stopping
101
Info Module Started
102
Info Module Stopped
103
Info Module Restarted
104
Fatal Error Loading Module
105
Failed
Error Stopping Module
106
Failed
Fatal Error Restarting Module
107
Failed
Error Unexpected
108
Module
Termination
Message When/Why
%1 stopping... During product shutdown.
The alert contains the
name of the module that is
stopping.
%1 started. During product shutdown.
The alert contains the
name of the module that
has been stopped.
%1 stopped. Product stopped
%1 restarted as The product is restarted
requested by the user. from the Web Console or
F-Secure Policy Manager
Console.
Module %1 (%2) could HTTP scanning module
not be loaded. %3 (httpscan.exe) cannot be
loaded. The alert contains
the reason for the failure.
Module %1 could not The alert is not used in this
be stopped. version.
Module %1 could not HTTP scanning module
be restarted. (httpscan.exe) cannot be
restarted.
Module %1 has Usually when the httpscan
crashed or was (Apache) worker process
terminated causes an exception and
unexpectedly. %2 is closed by the operating
system.
APPENDIX H
Error Codes
Solution
No actions are required.
No actions are required.
No actions are required.
No actions are required.
Check the reason for the
failure and act accordingly.
Restarting the product can
help in some cases. If the
problem persists, contact
F-Secure Technical
Support.
The alert is not used in this
version.
Check Error.log for more
information about the
failure. Manual restart of
the product can help in
some cases. If the problem
persists, contact F-Secure
technical support.
Check the error and access
logs for details. A particular
web site/request may be
causing this malfunction. If
this is the case, you can
configure the product to
block the access to the
problematic site until the
problem is resolved. If the
problem persists, contact
F-Secure technical support.
367