F-SECURE INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61 Administrator's Manual page 376

376
ID Severity Trap
Info Statistics Reset
115
Error Read Settings
120
Failed
Error Update Statistics
121
Failed
Error Statistics Reset
122
Failed
Error Policy Read
125
Failed
Error Policy Set Failed
126
Warning Invalid Setting
127
Message When/Why
Statistics were reset. Product statistics have
been reset from F-Secure
Policy Manager Console
or the Web Console.
Could not read the Settings have been
settings, using the changed but the product
default or the latest cannot read them.
settings.
Statistics could not be The product failed to
updated. update statistics, F-Secure
Policy Manager Console
and Web Console will
show outdated statistics.
Statistics could not be The product failed to reset
reset. statistics.
Reading the policy The product failed to read
variable %1 was some settings. The alert
unsuccessful due to contains the reason for the
%2. failure.
Setting the policy The product failed to
variable %1 was update the setting in
unsuccessful due to question. The alert
%2. contains the reason for the
failure.
The entry '%1' in the The setting in question
setting '%2' is invalid had an invalid value and
and ignored. was ignored.
Solution
No actions are required.
Check that F-Secure
Management Agent is up
and running. Restarting the
product or rebooting the
system might solve this
problem.
Check that F-Secure
Management Agent is up
and running. Restarting the
product or rebooting the
system might solve this
problem.
Check that F-Secure
Management Agent is up
and running. Restarting the
product or rebooting the
system might solve this
problem.
Act according to error
description. Restarting the
product or rebooting the
system might solve this
problem. If the problem
persists, consider
re-installing the product.
Act according to error
description. Restarting the
product or rebooting the
system might solve this
problem. If the problem
persists, consider
re-installing the product.
Check and correct the
setting in question. Refer to
the online help or the
manual to see what type of
input the setting requires.