Xerox DocuColor 7000AP System Administration Manual page 56

1. To o ls M od e
1- 5 2
• Lead Registration: Use this feature to adjust the lead
edge of the image for Side 1 and/or Side 2 registration.
– The factory default setting is zero (0).
– The arrows on the right side of the illustration show the
paper feed direction.
– The + sign, the left-pointing arrow, and the red lines
shows the direction the image will move on the paper
when the value is increased.
– If you select a negative value (for example, -1.0 mm),
the image on the paper moves toward the right.
• Side Registration: Use this feature to adjust the side
edge of the image for Side 1 and/or Side 2 registration.
– The factory default setting is zero (0).
Do c uC ol o r 7 0 00 A P /8 00 0 A P S y s te m A d mi n i s tr a ti o n G ui d e