Xerox DocuColor 7000AP System Administration Manual page 57

Do c u Co lo r 70 0 0A P /8 0 00 A P S y s t em A d m i ni s tr at i on G u i d e
– The + sign, the up arrow, and the red lines shows the
direction the image will move on the paper when the
value is increased.
– If you select a negative value (for example, -1.0 mm),
the image on the paper moves downward.
• Perpendicularity: Use this feature to adjust the image
digitally on the drum so that it will align with the paper for
both Side 1 and Side 2.
– The factory default setting is zero (0).
– The arrows on the right side of the illustration show the
paper feed direction.
– The + sign, the left-pointing arrow, and the red lines
shows the direction the image will move on the paper
when the value is increased.
– If you select a negative value (for example, -1.0 mm),
the image on the paper moves toward the right.
1 . Too l s M od e
1-53