Xerox DocuColor 7000AP System Administration Manual page 49

Do c u Co lo r 70 0 0A P /8 0 00 A P S y s t em A d m i ni s tr at i on G u i d e
12. If the output is not satisfactory, perform Steps 1-10 again to
readjust the parameters for this Custom Paper Profile.
• Run another Test Print to ensure that your output is
satisfactory.
• Continue to perform these steps until your output is
satisfactory.
13. Once your output is satisfactory, select the Close button.
This returns you to the Custom Paper Adjustment screen:
14. Select the Close button to return to the Custom Paper Setup
screen:
15. Select the Close button to save and close these settings for
this Custom Paper Profile.
If you do not want to save this profile, select the Reset button
to discard all the selections for this profile and reset them to
the machine defaults.
1 . Too l s M od e
1-45