1. To o ls M od e
1- 5 0
4. Touch the Alignment Profile buttons; the Alignment Profile
window opens.
5. Touch the Test Print button; a new window opens.
a. Touch the 2 Sided button.
NOTE: If you want to check the registration for 1 Sided
prints only, touch the 1 Sided button.
b. Select 10 test prints by touching the Up arrow button to
change the number of test prints generated.
c. Touch the Pattern Generator button.
d. Retrieve your output test prints from the digital press.
e. Discard the first few prints, as inconsistency tends to be
greater with these images.
Do c uC ol o r 7 0 00 A P /8 00 0 A P S y s te m A d mi n i s tr a ti o n G ui d e