Do c u Co lo r 70 0 0A P /8 0 00 A P S y s t em A d m i ni s tr at i on G u i d e
6. Evaluate the test prints by holding your 2 Sided output at eye
level near a light source. This will allow you to see the
registration marks for both Side 1 and Side 2 of the output.
a. If you determine that the registration between Side 1 and
Side 2 is significant and needs adjusting, proceed to the
Step 7.
b. If the registration between Side 1 and Side 2 is okay, stop
now:
–
Touch the Close button to return to the Alignment
Profile window.
–
Ensure that the Default button is selected and touch
the Close button.
–
Exit Tools Mode.
7. Select the desired Alignment feature that you want to adjust.
Each of the above Alignment features is discussed on the
following pages.
1 . Too l s M od e
1-51