Alignment Adjustment Profile Procedure - Xerox DocuColor 7000AP System Administration Manual

1. To o ls M od e
1- 4 8

Alignment Adjustment Profile procedure

Use the following procedure to create/modify an Alignment Profile
for adjusting Side 1/Side 2 image output.
KEY POINT: Before creating or modifying Alignment Profiles,
copy and use the chart at the back of this book to record your
Alignment Profile settings. This will ensure that you select the
correct profile for a custom job.
NOTE: If you require a Custom Paper Profile associated with this
Alignment Profile, you can set the Custom Paper Profile
information either now or after you create the Alignment Profile.
1. Access Tools Mode and touch the Alignment Adjustment
button on the Machine Defaults 2 screen; the following window
opens.
Do c uC ol o r 7 0 00 A P /8 00 0 A P S y s te m A d mi n i s tr a ti o n G ui d e