Xerox Document Centre 50 User Manual page 69

– 2 to 2 Sided button for two-sided copies
from two-sided input.
Select the Side 2 Rotate button to display
the Side 2 Rotate screen, illustrated in
Figure 15. You must specify the original
orientation and the copy orientation.
Touch Right/Left open for two-sided,
head-to-head output (e.g., books). Touch
Top/Bottom open for two-sided, head-to-
toe output (e.g., calendars).
– 2 to 1 Sided button for one-sided copies
from two-sided originals, illustrated in
Figure 16. Touch Flip on Long Edge if
your original documents are two-sided,
head-to-head. Touch Flip on Short Edge
if your original documents are two-sided,
head-to-toe output.
NOTE: 2 to 2 Sided copying and 2 to 1 Sided
copying can only be applied when using the
DADF. You must follow the procedure for Manual
2 sided copying (chapter 5) if you want to use the
Document Glass for 2 to 2 Sided copying. For 2 to
1 Sided copying on the Document Glass, select 1
to 1 Sided and copy each side of the original
individually.
NOTE:
•
If you are not using a DADF, perform one of
the following:
– Touch the 1 Sided button for default one-
sided copies.
– Touch the 1 to 2 Sided button to display
the 2 Sided Copy screen. Under Side 2
Rotate, perform one of the following:
Touch Flip on Long Edge for two-sided,
head-to-head output (e.g., books).
Touch Flip on Short Edge for two-sided,
head-to-toe output (e.g., calendars).
Touch the button next to the icon that most closely
resembles the Original Orientation for the
document on the Document Glass.
DOCUMENT CENTRE CS 50 USER GUIDE
Figure 15: Side 2 Rotate screen
Figure 16: 2 to 1 Sided Copying option
3–11
1
2
3
4
5
6
7
MAKING COPIES