Xerox Document Centre 50 User Manual page 210

If the DADF senses non-standard size documents
in the feeder, a message displays and the copier/
printer stops. Place such non-standard documents
on the Document Glass, or enter the document
size by using the Original Size feature in the
Added Features tab. Refer to chapter 5, "Added
Features," for more information.
If the input document is slightly smaller or larger
than a standard size document, the Duplex
Automatic Document Feeder may detect it as a
2
standard size document. Dark areas or image loss
along the edges may occur. Enter the document
size by using the Original Size feature or the Edge
Erase feature in the Added Features tab. Refer to
chapter 5, "Added Features," for more information.
10
3
4
5
6
7
DUPLEX AUTOMATIC DOCUMENT FEEDER 10–6 DOCUMENT CENTRE CS 50 USER GUIDE