Sided Copying; Using The 2 Sided Copying Feature - Xerox Document Centre 50 User Manual

Use the 2 Sided Copying feature on the Added
Features tab to select 1-sided or 2-sided copy,
with options for 2-sided output.
KEY POINT: The 2 Sided Copying feature is
available for output of 16 lb. through 28 lb. (64
through 105 gsm) paper or for standard sizes
smaller than 12 x 18 inches (A3). Use the
2
procedure, "Manual 2 Sided Copying," found later
in this chapter for paper outside these limits.
3
1
On the Added Features tab, locate and touch the
2 Sided Copy feature, as in Figure 2.
4
2 If you are using a DADF, you may choose one of
the following features (Figure 3):
•
5
5
•
6
7
ADDED FEATURES

2 Sided Copying

Using the 2 Sided Copying feature

1 to 1 Sided button for default 1-sided copies
1 to 2 Sided button for 2-sided copies from 1-
sided input, as illustrated in Figure 4.
– Touch Flip on Long Edge for 2-sided,
head-to-head output, as for books.
– Touch Flip on Short Edge for 2-sided,
head-to-toe output, as for calendars.
Figure 2: 2 Sided Copying feature on the
Figure 3: 2 Sided Copying options
Figure 4: 1 to 2 Sided Copying option
5–4
Basic Copying tab
DOCUMENT CENTRE CS 50 USER GUIDE