Xerox Document Centre 50 User Manual page 68

7
Touch the Added Features tab and touch the
Original Size button to display the Original Size
screen, Figure 12.
Touch a standard option for Original Size or use
the horizontal and vertical arrows to set a non-
standard size if a setting other than the default
(Auto Detected) is desired.
Touch the Save button to return to the Added
Features tab.
2
8
On the Added Features tab, touch the 2 Sided
Copy button and perform one of the following.
•
3
3
4
5
6
7
MAKING COPIES
If you are using a DADF, touch the desired
option from those illustrated in Figure 13:
– 1 to 1 Sided button for default one-sided
copies
– 1 to 2 Sided button for two-sided copies
from one-sided input, as illustrated in
Figure 14. Touch Flip on Long Edge for
two-sided, head-to-head output (e.g.,
books). Touch Flip on Short Edge for
two-sided, head-to-toe output (e.g.,
calendars).
Figure 12: Original Size screen
Figure 13: 2 Sided Copying options
Figure 14: 1 to 2 Sided Copying option
3–10 DOCUMENT CENTRE CS 50 USER GUIDE