Adding Staples - Xerox Document Centre 50 User Manual

1 Open the stapler by grasping the cover at the two
indentations on the upper right and left side and
pulling it straight up and back (Figure 10).
2
3
2
Pull the empty cartridge out by holding the gold
tabs and pulling the cartridge straight out (Figure
11). Dispose of the cartridge according to local
regulations.
3
Align the new cartridge so that the metal arms of
the stapler fit between the staples and the bottom
edge of the cartridge.
4
4
Push the cartridge firmly to the back until the
cartridge clicks into place.
5 Close the cover by moving it down until it clicks
closed.
12
5
6
7
ACCESSORIES

Adding staples

Figure 10: Opening the stapler
Figure 11: Pulling the cartridge out
12–12 DOCUMENT CENTRE CS 50 USER GUIDE