Document Glass - Xerox Document Centre 50 User Manual

After you have selected the desired features, you
should place the original document onto the
Document Glass. Raise the Duplex Automatic
Document Feeder and place (register) the
document in the correct orientation on the
Document Glass for long edge feed or short edge
feed, as illustrated in Figure 13.
2
2
NOTE: You can set the orientation on a number of
user screens or the System Administrator can
change the default orientation in Tools Mode.
The document must be face down and in the
upper-left corner of the Document Glass.
Lower the Duplex Automatic Document Feeder
and press the Start button to begin the scan
3
operation.
KEY POINT: The maximum scanned image size
is 11 x 17 inches or A3. To copy an image of this
size onto 12 x 17.7 inch or SRA3 paper, you must
select 102% enlargement.
4
5
6
7
GETTING TO KNOW YOUR COPIER/PRINTER

Document Glass

Figure 13: Registering a document
2–14
on the Document Glass
DOCUMENT CENTRE CS 50 USER GUIDE