Vivotek IP8162P User Manual page 155

notifyserver 0~31
weekday 0~127
begintime hh:mm
endtime hh:mm
prefix string[16]
cyclesize 200~
reserveamount 0~
dest cf,
0~4
cffolder string[128]
adaptive_enable 0,1
<product dependent>
adaptive_preevent 0~9
<product dependent>
adaptive_postevent 0~10
<product dependent>
7.34 HTTPS
6/6 Indicate which notification server is scheduled.
One bit represents one application server (server_i0~i4).
bit0 (LSB) = server_i0.
bit1 = server_i1.
bit2 = server_i2.
bit3 = server_i3.
bit4 = server_i4.
For example, enable server_i0, server_i2, and server_i4 as
notification servers; the notifyserver value is 21.
6/6 Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on Friday and Sunday, set
weekday as 66.
6/6 Start time of the weekly schedule.
6/6 End time of the weekly schedule.
(00:00~24:00 indicates schedule always on)
6/6 Indicate the prefix of the filename.
6/6 The maximum size for cycle recording in Kbytes when
choosing to limit recording size.
(not used in IP8162)
6/6 The reserved amount in Mbytes when choosing cyclic
recording mechanism.
6/6 The destination to store the recorded data.
"cf" means local storage (CF or SD card).
"0" means the index of the network storage.
6/6 Folder name.
6/6 Indicate whether the adaptive recording is enabled
6/6 Indicate when is the adaptive recording started before the
event trigger point (seconds)
6/6 Indicate when is the adaptive recording stopped after the
event trigger point (seconds)
VIVOTEK
User's Manual - 155