Vivotek IP8162P User Manual page 135

7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME
brightness
saturation
saturationpercent
contrast
sharpness
sharpnesspercent
gammacurve
lowlightmode
profile_i0_enable
profile_i0_policy
profile_i0_begintime
profile_i0_endtime
profile_i0_contrast
profile_i0_sharpness
profile_i0_sharpnesspercent
profile_i0_gammacurve
profile_i0_lowlightmode
profile_i0_wdrcstrength
profile_i0_wdrcmode
high
VALUE SECURITY
(get/set)
-5~5 4/4
-5~5,100 4/4
0~100 4/4
-5 ~ 5 4/4
-3~3,100 4/4
0~100 4/4
0~100 4/4
<boolean> 4/4
<boolean> 4/4
day, 4/4
night,
schedule
hh:mm 4/4
hh:mm 4/4
-5 ~ 5 4/4
-3~3 4/4
0~100 4/4
0~100 4/4
<boolean> 4/4
0~2 4/4
0~3 4/4
DESCRIPTION
Adjust brightness of image according to mode
settings.
Adjust saturation of image according to mode
settings.
100 for saturation percentage mode.
Adjust saturation value of percentage when
saturation=100
Adjust contrast of image according to mode
settings.
Adjust sharpness of image according to mode
settings.
Adjust sharpness value of percentage when
sharpness=100
Gamma curve.
Enable/disable low light mode.
Enable/disable this profile setting
The mode which the profile is applied to.
Begin time of schedule mode.
End time of schedule mode.
Adjust contrast of image according to mode
settings.
Adjust sharpness of image according to mode
settings.
Adjust sharpness value of percentage when
sharpness=100
Gamma curve
Enable/disable low light mode.
WDR enhanced
0: low
1: medium
2: high
WDR enhanced
0: off
VIVOTEK
User's Manual - 135