Table of Contents
Advertisement
VIVOTEK
There are three types of rules:
Single: This rule allows the user to add an IP address to the Allowed/Denied list�
For example:
192.168.2.1
Network: This rule allows the user to assign a network address and corresponding subnet mask to the
Allow/Deny List�
For example:
IP address 192�168�2�x will be bolcked�
Range: This rule allows the user to assign a range of IP addresses to the Allow/Deny List�
Note: This rule is only applied to IPv4�
For example:
Administrator IP address
Always allow the IP address to access this device: You can check this item and add the Administrator's
IP address in this field to make sure the Administrator can always connect to the device.
User's Manual - 47
Advertisement
Table of Contents
