Eptz Setting - Vivotek IP8162P User Manual

PARAMETER VALUE
s<0~(m-1)>_home <coordinate>
s<0~(m-1)>_size <window size> 6/6

7.37 ePTZ setting

Group: eptz_c<0~(n-1)> for n channel product.
PARAMETER VALUE
osdzoom <boolean>
smooth <boolean>
tiltspeed -5 ~ 5
panspeed -5 ~ 5
zoomspeed -5 ~ 5
autospeed 1 ~ 5
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product and m is the number of streams which support ePTZ.
(capability.eptz > 0)
PARAMETER VALUE
patrolseq string[120]
patroldwelling string[160]
preset_i<0~19>_name string[40]
preset_i<0~19>_pos <coordinate>
SECURITY DESCRIPTION
(get/set)
6/6 ROI left-top corner coordinate.
ROI width and height. The width value must be multiples of
16 and the height value must be multiples of 8
(capability.eptz > 0)
SECURITY DESCRIPTION
(get/set)
1/4 Indicates multiple of zoom in is "on-screen display" or not
1/4 Enable the ePTZ "move smoothly" feature
1/7 Tilt speed
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
1/7 Pan speed
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
1/7 Zoom speed
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
1/7 Auto pan/patrol speed
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
SECURITY DESCRIPTION
(get/set)
1/4 The patrol sequence of ePTZ. All the patrol position indexes
will be separated by ","
1/4 The dwelling time (unit: second) of each patrol point,
separated by ",".
1/7 Name of ePTZ preset.
(It should be set by ePreset.cgi rather than by
setparam.cgi.)
1/7 Left-top corner coordinate of the preset.
(It should be set by ePreset.cgi rather than by
setparam.cgi.)
VIVOTEK
User's Manual - 157