VIVOTEK
setparamlevel
7.23 camera PTZ control
Group: camctrl (capability.camctrl.httptunnel > 0)
NAME
enablehttptunnel
Group: camctrl_c<0~(n-1)> for n channel product
NAME
panspeed
tiltspeed
zoomspeed
focusspeed
patrolseq
patroldwelling
preset_i<0~(npreset-1
)>_name
preset_i<0~(npreset-1
)>_ dwelling
uart
cameraid
isptz
disablemdonptz
7.24 UART control
Group: uart (capability.nuart > 0)
NAME
142 - User's Manual
0~2
6/6
VALUE
SECURITY
(get/set)
<boolean>
4/4
VALUE
SECURITY
(get/set)
-5 ~ 5
1/4
-5 ~ 5
1/4
-5 ~ 5
1/4
-5 ~ 5
1/4
string[64]
1/4
string[128]
1/4
string[40]
1/4
0 ~ 999
1/4
0 ~ (m-1), m
1/4
is UART count
0~255
1/4
0 ~ 2
1/4
<boolean>
1/4
VALUE
SECURITY
6: LOG_INFO
7: LOG_DEBUG
Show log of parameter setting.
0: disable
1: Show log of parameter setting set from external.
2. Show log of parameter setting set from external and
internal.
DESCRIPTION
Enable HTTP tunnel for camera control.
(capability.ptzenabled)
DESCRIPTION
Pan speed
Tilt speed
Zoom speed
Auto focus speed
(For external device)
The indexes of patrol points, separated by ","
(For external device)
The dwelling time of each patrol point, separated by ","
Name of the preset location.
The dwelling time of each preset location
Select corresponding uart
(capability.nuart>0).
Camera ID controlling external PTZ camera.
0: disable PTZ commands.
1: enable PTZ commands with PTZ driver.
2: enable PTZ commands with UART tunnel.
Disable motion detection on PTZ operation.
DESCRIPTION