Vivotek IP8162P User Manual page 164

VIVOTEK
[&x=<value>&y=<value>&videosize=<value>&resolution=<value>&stretch=<value>]
(Move the center of image to the coordination (x,y) based on resolution or videosize.)
[ [&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>][&speedapp=<value>][&speedlink=<value
>] ] – Set speeds
[&return=<return page>]
Example:
http://myserver/cgi-bin/viewer/camctrl.cgi?channel=0&camid=1&move=right
http://myserver/cgi-bin/viewer/camctrl.cgi?channel=0&camid=1&zoom=tele
http://myserver/cgi-bin/viewer/camctrl.cgi?channel=0&camid=1&x=300&y=200&resolution=704x480&videosize=
704x480&strech=1
PARAMETER VALUE
channel <0~(n-1)>
camid 0,<positive integer>
move home
up
down
left
right
speedpan -5 ~ 5
speedtilt -5 ~ 5
speedzoom -5 ~ 5
speedfocus -5 ~ 5
speedapp -5 ~ 5
auto pan
patrol
stop
zoom wide
tele
stop
zooming wide or tele
zs 0 ~ 6
0 ~ 15 <SD81X1>
vx <integer , excluding 0> The slope of movement = vy/vx, used for joystick control.
vy <integer>
164 - User's Manual
DESCRIPTION
Channel of video source.
Camera ID.
Move to camera to home position.
Move camera up.
Move camera down.
Move camera left.
Move camera right.
Set the pan speed.
Set the tilt speed.
Set the zoom speed.
Set the focus speed.
Set the auto pan/patrol speed.
Auto pan.
Auto patrol.
Stop camera.
Zoom larger view with current speed.
Zoom further with current speed.
Stop zoom.
Zoom without stopping for larger view or further view with zs speed, used
for joystick control.
Set the speed of zooming, "0" means stop.
– Click on image