Vivotek IP8162P User Manual page 177

interger>
Return Code
400 Bad Request
415 Unsupported Media Type
8. 24 Open Anystream (capability.nanystream > 0)
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http://<servername>/videoany.mjpg?codectype=mjpeg[&resolution=<value>&mjpeg_quant=<value>&mjpeg_qv
alue=<value>&mjpeg_maxframe=<value>]
For RTSP (MPEG4), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/liveany.sdp?codectype=mpeg4[&resolution=<value>&mpeg4_intraperiod=<value>&mpeg4
_ratecontrolmode=<value>&mpeg4_quant=<value>&mpeg4_qvalue=<value>&mpeg4_bitrate=<value>&mpeg4
_maxframe=<value>]
For RTSP (H264), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/liveany.sdp?codectype=h264[&resolution=<value>&h264_intraperiod=<value>&
h264_ratecontrolmode=<value>& h264_quant=<value>& h264_qvalue=<value>& h264_bitrate=<value>&
h264_maxframe=<value>]
<product dependent>
PARAMETER VALUE
codectype mjpeg, mpeg4, h264
<product dependent>
solution capability_videoin_resolution <product
mjpeg_quant 0, 1~5
99, 1~5
<product dependent>
mjpeg_qvalue 10~200
2~97
<product dependent>
mjpeg_maxframe 1~25,
26~30 (only for NTSC or
(Used by forcechk)
Description
Request is rejected because some parameter values are illegal.
Returned, if forcechk appears, when minsft is not achievable or the timeshift
feature of the target stream is not enabled.
DEFAULT
N/A
dependent>
3
50
<product
dependent>
15
DESCRIPTION
Set codec type for Anystream.
Video resolution in pixels.
Quality of JPEG video.
0,99 is the customized manual input setting.
1 = worst quality, 5 = best quality.
<product dependent>
Manual video quality level input.
(This must be present if mjpeg_quant is equal
to 0, 99)
<product dependent>
Set maximum frame rate in fps (for JPEG).
VIVOTEK
User's Manual - 177