Fine-Tune The Cs-Mount - Vivotek IP8162P User Manual

Fine-tune the CS-Mount

1�Detach the CS-mount lens from the camera body�
2�Turn the right side of the camera body up�
3�Use the supplied L-type hex key wrench to loosen the lens mounting screw; the CS
mount ring becomes rotatable�
4.Use a coin to turn the CS-mount ring; fine-tune the distance between the sensor and the
lens�
5.When finished, tighten the lens mounting screw to fix the CS-mount ring.
6�Attach the CS-mount lens back to the camera body�
1
Lens mounting screw
3
2
CS-mounting ring
4
VIVOTEK
User's Manual - 13