Vivotek IP8162P User Manual page 149

uart_httptunnel
transmission_mode
network_wire
network_wireless
wireless_s802dot11b
wireless_s802dot11g
wireless_encrypt_wep
wireless_encrypt_wpa
wireless_encrypt_wpa2
wireless_beginchannel
wireless_endchannel
derivative_brand
npreset
eptz
nanystream
iva
tampering
test_ac
version_onvifdaemon
image_wdrc
image_ iristype
image_ focusassist
<boolean> 0/7
Tx, 0/7
Rx,
Both
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
1 ~ 14 0/7
1 ~ 14 0/7
<boolean> 0/7
0, <positive 0/7
integer>
0, <positive 0/7
integer>
0, <positive 0/7
integer>
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<string> 0/7
<Boolean> 0/7
<string> 0/7
<Boolean> 0/7
0: support only /cgi-bin/viewer/camctrl.cgi
Indicate whether to support HTTP tunnel for
UART transfer.
Indicate transmission mode of the machine: TX =
server, Rx = receiver box, Both = DVR.
Indicate whether to support Ethernet.
Indicate whether to support wireless.
Indicate whether to support wireless 802.11b+.
Indicate whether to support wireless 802.11g.
Indicate whether to support wireless WEP.
Indicate whether to support wireless WPA.
Indicate whether to support wireless WPA2.
Indicate the begin channel of wireless network
Indicate the end channel of wireless network
Indicate whether to support the upgrade function
for the derivative brand. For example, if the value
is true, the VVTK product can be upgraded to
VVXX. (TCVV<->TCXX is excepted)
Number of preset locations
A 32-bit integer, each bit can be set separately as
follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
number of any media stream per channel
Indicate whether to support Intelligent Video
analysis
Indicate whether to support tampering detection.
Indicate whether to support test ac key.
Indicate ONVIF daemon version
Indicate whether to support WDR enhanced.
Indicate iris type.
Indicate whether to support focus assist.
VIVOTEK
User's Manual - 149