Vivotek IP8162P User Manual page 88

VIVOTEK
■ Event name: Enter a name for the event setting�
■ Enable this event: Select this option to enable the event setting�
■ Priority: Select the relative importance of this event (High, Normal, or Low)� Events with a higher
priority setting will be executed first.
■ Detect next event after
a motion is detected�
1�
Schedule
Specify the period for the event� Please select the days of the week and the time in a day (in 24-hr time
format) for the recording schedule�
2� Trigger
This is the cause or stimulus which defines when to trigger the Network Camera. The trigger source can
be configured to use the Network Camera's built-in motion detection mechanism or external digital input
devices�
There are several choices of trigger sources as shown on next page� Select the item to display the
detailed configuration options.
■ Video motion detection
This option makes use of the built-in motion detection mechanism as a trigger source� To enable this
function, you need to configure a Motion Detection Window first. For more information, please refer to
Motion Detection on page 100 for details�
■ Periodically
This option allows the Network Camera to trigger periodically for every other defined minute. Up to 999
minutes are allowed�
■ Digital input
This option allows the Network Camera to use an external digital input device or sensor as a trigger
source� Depending on your application, there are many choices of digital input devices on the market
which helps to detect changes in temperature, vibration, sound, and light, etc�
■ System boot
This option triggers the Network Camera when the power to the Network Camera is disconnected�
■ Recording notify
This option allows the Network Camera to trigger when the recording disk is full or when recording
starts to rewrite older data�
88 - User's Manual
seconds: Enter the duration in seconds to pause motion detection after