nFUSE
ECE Lightbar
®
#
Button
Function
S1
Pushbutton 1
Left Arrow
S2
Pushbutton 2
S3
Pushbutton 3
S4
Pushbutton 4
Takedown
S5
Pushbutton 5
Cruise 1
S6
Pushbutton 6
Low Power 1
S7
Pushbutton 7
S8
Pushbutton 8
Single Button
S9
Right Arrow
Arrow
S10
Slide Switch 1
Warning
S11
Slide Switch 2
Warning
S12
Slide Switch 3
Warning
The photo sensor continuously monitors ambient light conditions and will control functions configured for operation with
the photo sensor input. By default, the photo sensor will set all light modules into low power mode when dark ambient
light levels below 50 lux are detected for more than 5 seconds. When ambient light levels exceed 300 lux for 5 seconds,
the low power mode will clear/turn off and the lightbar will revert back to full intensity.
The photo sensor is subject to ambient light conditions of the specific environment for the vehicle and needs to be thor-
oughly tested by the installer to ensure proper light levels and delay are selected to provide the most effective operation
in different lighting conditions.
The photo sensor detects ambient light levels, so parking the vehicle under a bright street light during night-time use may
(CLEAR) turn off the photo sensor input. Likewise, driving though a dark tunnel during daytime use may (SET) the photo
sensor input. Ensure the operator of the vehicle is aware of such possible
conditions and provide additional controls to the breakout box to allow the operator the ability to manually over-ride the
functions when required.
The photo sensor is located in the middle of the AutoDim / Mod ID module.
Changing the ambient light SET/CLEAR levels may be modified by updating the setting in the 'Photo Sensor' tab in the PC
Application.
17
800-338-7337 | soundoffsignal.com
SIREN FUNCTIONS
Mods affected
Scene
Left Alley and Left Alley Scene
Scene
Right Alley and Right Alley Scene
Selected at Bar Creation
Inboard 1, Corners & Alleys (Front and Rear)
Scene 1
Selected at Bar Creation
-
Entire bar (Rear)
Entire Bar (Front and Rear)
Entire Bar (Front and Rear)
PHOTO SENSOR
Inboards
Entire Bar
Inboards
"Color
(if the color is
not populated,
Flash
it would be
the next color
listed)"
Amber→Color 1
-
White→nothing
-
White→nothing
-
White
-
Color 1
-
-
-
White
-
No
-
Amber→Color 1
-
Color 1
Mode 2
Color 1
Mode 3
Color 1
Mode 4
CERT chosen
SAE/
ECE
NONE
Pattern
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Slow Runner
ECE Single
Quint
ECE Single
Intercycle
ECE Single
nFUSE
ECE Lightbar English
®
0000KP 0325 REV A
Need help?
Do you have a question about the nFUSE and is the answer not in the manual?