DKV BOX EUROPE On Board Unit User Manual page 45

OBU Manual
8 Driving with the OBU
Start the OBU
Figure 17: Start the OBU
Welcome...
Waiting for
personalization
UNKNOWN A-
ABCDEF12 t12.0
Not ready
DEbag
ABCDEF12
The EETS Service is detected and the display shows the start screen with the
corresponding EETS Service.
Before you start to drive:
Please, check the shown vehicle data: License plate number, number of axles.
Please, check the relevant settings for the corresponding EETS Service.
Change the settings if necessary, see chapter 5.2 OBU Settings:
• Number of axles
• Current gross train weight.
DEbag
ABCDEF12
Version 6.7, GM 4.8.1
please wait.
t
3
≥7.5
EU5
The OBU is ready for operation.
t
3
≥7.5
EU5 You can start driving.
July 15, 2024
•
Turn on the ignition of your vehicle. The OBU
starts to boot automatically.
•
The boot information will be shown in the display.
The status indicator shows the status of the OBU.
•
The initial configuration and activation of the OBU
is done automatically.
The vehicle data for this OBU is provided
according to the registration data provided by
your Service Partner.
•
Please note, the OBU indicates the corresponding
EETS Service depending on your place of location.
45