DKV BOX EUROPE On Board Unit User Manual page 20

OBU Manual
After updating the value, press right key for "ok". Leave the menu by pressing two times the left key to
come back to the start display.
You can also use this menu to only check the currently set weight. If you do not want to change it, leave the
menu by pressing the left key without pressing "ok". If you press left key without saving and the weight has
been modified, an information screen will be displayed for some seconds: "Value not changed" and the old
value is kept.
CONFIGURATION CHlsv
5.2.4
5.2.4.1 Trailer weight entry for toll service Switzerland
For CHlsv the user always needs to check and/or update the entry of the trailer weight before entering Switzer-
land especially when a trailer was coupled or uncoupled. The current gross trailer weight is the maximum per-
missible weight of the attached trailer.
When the service Switzerland is personalized on the OBU the expected gross trailer weight is configured on the
OBU. If a trailer with a different weight is used the road user should modify the trailer weight declaration, ac-
cordingly.
The weight can be changed in the "Trailer weight" submenu, which is part of the main menu "Configuration
CHlsv". The digit that can be changed is highlighted with a grey cursor. It can be changed with the "Up" or
"Down" key. Long press on or moves the position of the changeable digit one position to the right or left.
After updating the value, briefly press the right button for "ok". Leave the menu by pressing the left button
several times to return to the start display. The trailer weight is only relevant if a trailer is used (trailer
axles >0). It does not need to be set to zero if no trailer is used (the value zero cannot be entered by the driver
as a permissible weight).
You can also use this menu to check the currently set weight. If you do not want to change the weight, leave
the menu without saving by pressing the left button without "ok". If you leave the menu without saving and
the weight has been changed before, a message "Value not changed" will be displayed for a few seconds and
the old value will be kept.
Version 6.7, GM 4.8.1 July 15, 2024 20