DKV BOX EUROPE On Board Unit User Manual page 12

Mounting the OBU on the windshield
Attach the adhesive pads to the windscreen at temperatures above 20 °C. The glue of the
adhesive pads reaches its final strength only after 72 h and if applied at temperatures of 20 °C
or above. If applicable, heat the windscreen and the holder's adherend to appropriate
temperatures.
Figure 7: Mounting the holder on the windshield
Assemble the OBU to the holder
Figure 8: Assembling the OBU to the holder
Version 6.7, GM 4.8.1
Clean the selected location on the windshield carefully with a cleaning
cloth. Wait until the surface is dry.
Remove the protection films from the adhesive pads.
Attach the holder at the chosen position with the adhesive pads.
Consider the sign  up for the correct direction of the holder.
Position the holder and firmly press where the adhesive pads are located.
Place the OBU in front of the holder and click it into the holder.
Check the right position of the OBU.
You cannot move the OBU in the holder. Check this carefully.
July 15, 2024 12