DKV BOX EUROPE On Board Unit User Manual page 24

OBU Manual
In the menu you can find an option to configure the blinking of the LED, which appears ussually in case of a red
or yellow LED. Blinking in "active" mode is set as default, via the menu you can switch the mode to "inactive".
Press right key for selection ("ok").
5.2.8.3 Configure Bluetooth
Accessing the Bluetooth menu item offers the user the options (1: Pairing) to connect/disconnect to a mobile
device (i.e. smartphone) or (2: Bluetooth State) to change the current Bluetooth module status (on/off). Press
right key for selection ("ok"); press left key to go back.
Pairing
Starting the Bluetooth pairing process will generate a new Bluetooth PIN which is temporarily displayed on the
HMI. Upon entering and confirming the PIN on a smartphone a connection between OBU and smartphone is
established. (Note: The Bluetooth pairing process will terminate upon inactivity). On the contrary, "Unpairing"
will remove all existing pairings (previous connections) from the OBU Bluetooth module.
The OBU may re-connect to known devices - no new pairing is necessary.
Bluetooth state
The user may activate/deactivate the Bluetooth module to allow/disallow any kind of (existing/new)
connection with another device. The Bluetooth module is deactivated per default.
To unveil all Bluetooth features, a OBU companion smartphone application is available for Android
smartphones in the Google Play Store:
Version 6.7, GM 4.8.1 July 15, 2024 24