Ruijie Reyee RG-EST450G Installation Manual page 25

Installation Guide
4
Debugging
4.1 Power-On
(1) Checklist Before Power-On
○
The power cord is properly connected.
○
The power voltage meets the requirement.
(2) Recommended: After the bridge is powered on, check whether the LED status is normal.
4.2 Configuring the Bridge

Method 1: Configure the bridge through Ruijie Reyee App
(1) The power cord is properly connected.
(2) Scan the QR code on this page or on the device to download and install Ruijie Reyee App.
(3) Log in to Ruijie Reyee App.

Method 2: Log in to eWeb for configuration
(1) Connect the LAN port of the bridge to a PC using an Ethernet cable for wired connection, or connect your
smartphone or PC to the device's SSID (default SSID: @Ruijie-bxxxx) for wireless connection.
(2) Enter https://10.44.77.254 in a browser to access the device's eWeb.
(3) Enter the device password (default password: admin) and click Login to log in to eWeb for configuration.
Caution

Enter the initial password admin to log in and begin configuration.

To ensure device security, set a password after login and change the password regularly.
19
Debugging