Related Manuals for Rosslare AC-D32
Summary of Contents for Rosslare AC-D32
- Page 1 ROSSLARE INSTRUCTION MANUAL Mode Door AC-D32 STAND-ALONE ACCESS CONTROL UNIT ROSSLA R E ROSSLA R E www.rosslare.com.hk 08/01...
-
Page 2: Table Of Contents
Contents Introduction INTRODUCTION The AC-D32 is a proximity card and keypad access control unit. Technical Specifications Key Features The unit accepts up to 500 users and provides entry via the use of proximity cards and/or PIN codes. INSTALLATION Mounting the AC-D32 Controller... -
Page 3: Technical Specifications
Technical Specification Key Features Here are some of the AC-D32's key features: Electrical Characteristics Operating Voltage Range: Built in Proximity Card Reader (125 KHz ASK Modulation) 12 to 16V DC From a Regulated Power Supply Built in Keypad for PIN code entry... -
Page 4: Installation
This location should be at shoulder height and on the same side as the door handle. Mode The AC-D32 is designed to be easily mounted to a US Gang Box. Door Remove the Bezel Screw. (Use the diagram below to help you... -
Page 5: Wiring Diagrams
Wiring Diagrams REX / BL Lock AC-D32 Page 8 06/01 AC-D32 Page 9 06/01... -
Page 6: Normal, Secure, & Master Users
Normal, Secure, & Master Users Modes of Operation The AC-D32 accepts up to 500 users and provides entry via the use The AC-D32 has 3 Modes of Operation: of proximity cards and / or PIN codes. Each user is provided with... -
Page 7: Changing The Modes Of Operation
Mode Door the Mode change. GREEN GREEN Mode LED will turn green Press the "#" key to confirm Mode Door the Mode change. GREEN Mode LED will turn green. AC-D32 Page 12 06/01 AC-D32 Page 13 06/01... -
Page 8: Request To Exit (Rex) Button
X32, AC-X41, and AC-X42 series Standalone Controllers (For a PIN code, it is usually located in a convenient location, e.g. Inside more up-to-date list of compatible products check the Rosslare Web the door or at a receptionist's desk. The function of the REX button Site at www.rosslare.com.hk). -
Page 9: Programming The Ac-D32
LED will turn GREEN green and the AC-D32 will be in The table below shows the names of all the AC-D32 Menus. It also Programming Mode. shows of all the AY-D32's default factory codes and settings. -
Page 10: Changing The Open Code 1
Code will automatically be deleted, ready for a new Open Code 2 Note: - Programming Code can not be erased, i.e. the code to be re-entered. 0000 is not valid and will not erase the Programming Code. AC-D32 Page 18 08/01 AC-D32 Page 19 06/01... -
Page 11: Changing The Normal / Secure Code
Code and Door Chime can be programmed. Disable Bypass Mode - Disable Door Chime Disable Bypass Mode - Enable Door Chime Enable Bypass Mode - Disable Door Chime Enable Bypass Mode - Enable Door Chime AC-D32 Page 20 06/01 AC-D32 Page 21... -
Page 12: Setting Fail Safe/Secure Operation
Secondary Code and the User Slot Code is unknown. The Code Search method only works if a users Primary Code is already enrolled but the Secondary Code is not. (See Enrolling Users with the Code Search Method on Page 25) AC-D32 Page 22 06/01 AC-D32... - Page 13 If the Primary Code entered is not valid, you will hear a long beep Present a Proximity Card or enter the 4-digit PIN that you want to and the AC-D32 will continue to wait for a valid Primary Code. assign as the Primary or Secondary Code for this slot number.
-
Page 14: Deleting Primary And Secondary Codes
If the User Slot is empty you will hear a long beep and the AC-D32 will return to Normal Mode If the Programming Code is valid, you will hear three beeps and the AC-D32 will return to Normal Mode. Enter your Programming Code to confirm the deletion. -
Page 15: Return To Factory Default Settings
Return To Factory Default Settings Replacing a lost Programming Code Warning: Note: The AC-D32 must be in Normal Mode otherwise this will not work. Make sure that the Mode LED is green before proceeding. You must be very careful before using this command! -
Page 16: Glossary
Default Factory Setting: Sounder) programming mode, deleting users, settings that the controller is Tamper Siren Time: The time (user and resetting the AC-D32 to its preprogrammed with when the Normal Mode: The system setting programmed) that the Tamper Siren factory default settings. -
Page 17: Technical Support
12 Wang Tai Road, Kowloon Bay, Hong Kong. Tel: (852) 2795 5630 Fax: (852) 2795 1508 E-mail: info@rosslare.com.hk Europe, Russia, Middle East, Africa Rosslare Security Products S.r.l Via F.lli Gabba 5, 20121 Milano, Italy Tel: (39) 0382 24800 Fax: (39) 0382 24800 E-mail: marco.rogante@tin.it rosslarect@aol.com...
Need help?
Do you have a question about the AC-D32 and is the answer not in the manual?
Questions and answers