Download Print this page

SICK MultiTask RAY10 Operating Instructions Manual page 25

Photoelectric sensors
Hide thumbs Also See for MultiTask RAY10:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 22
2
Safety information
2.1
Qualification of personnel
2.2
Intended use
3
Product description
3.1
Product identification via the SICK product ID
8022198.1P2T/2024-11-25 | SICK
Subject to change without notice
The following information is available depending on the product:
This document in all available language versions
Data sheets
Other publications
CAD files and dimensional drawings
Certificates (e.g., declaration of conformity)
Software
Accessories
Connection, mounting and configuration of the product must only be car‐
ried out by qualified personnel.
This product does not constitute a safety component as defined in the
NO
Machinery Directive.
2006/42/EC
SAFETY
Do not install the product in places exposed to direct UV radiation (sun‐
light) or other weather conditions.
The product must be adequately protected against moisture and contami‐
nation.
Any work on the product may only be carried out by personnel qualified and authorized
to do so.
Qualified personnel are able to perform tasks assigned to them and can independently
recognize and avoid any potential hazards. This requires, for example:
technical training
experience
knowledge of the applicable regulations and standards
The RAY10 is an opto-electronic photoelectric retro-reflective sensor (referred to as
"sensor" in the following) for the optical, non-contact detection of objects, animals, and
persons. A reflector is required for this product to function. If the product is used for any
other purpose or modified in any way, any warranty claim against SICK AG shall become
void.
SICK product ID
The SICK product ID uniquely identifies the product. It also serves as the address of the
web page with information on the product.
The SICK product ID comprises the host name pid.sick.com, the part number (P/N),
and the serial number (S/N), each separated by a forward slash.
For many products, the SICK product ID is displayed as text and QR code on the type
label and/or on the packaging.
OPERATING INSTRUCTIONS
O P E R A T I N G I N S T R U C T I O N S | RAY10
en
25

Advertisement

loading
Need help?

Need help?

Do you have a question about the MultiTask RAY10 and is the answer not in the manual?