Page 1
O P E R A T I N G I N S T R U C T I O N S KTS/KTX Prime Contrast sensor U 5-PIN analog output...
Page 2
This work is protected by copyright. Any rights derived from the copyright shall be reserved for SICK AG. Reproduction of this document or parts of this document is only permissible within the limits of the legal determination of Copyright Law. Any modi‐...
Pro level (advanced settings)..............Other displays and functions..............8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
Page 4
13.1 EU declaration of conformity and certificates........13.2 Certification according to UL 60947-5-2..........13.3 Licenses....................O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
… indicates a situation of imminent danger, which will lead to a fatality or serious injuries if not prevented. 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
Before calling, make a note of all type label data such as type code, serial number, etc., to ensure faster processing. O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
The system designer must provide measures to ensure the safety of persons and systems in accordance with the legal guidelines. SICK AG assumes no liability for losses or damage arising from the use of the product, either directly or indirectly. This applies in particular to use of the product that does not conform to its intended purpose and is not described in this documentation.
IEC 62471:2006. No special measures are required (e.g., eye protection). O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
The product is a replacement device. The device is not intended to be repaired. Interfer‐ ence with or modifications to the device on the part of the customer will invalidate any warranty claims against SICK AG. 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
2 = transverse 4 = round A = round O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Display and control panel Fixing hole Light emission 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
Page 12
Figure 5: KTS Prime long sensing range light emission long housing side Connection Mounting slot Display and control panel O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 13
8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
Page 14
• Color control in yarn or line production O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Figure 8: KTS Prime Figure 9: KTX Prime light emission short housing side 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
Page 16
To secure a stable detection when having high gloss material a tilt angle of 10°-15° might be necessary. O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
If these instructions are not complied with, the IP enclosure rating for the device is not guaranteed! 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
NPN switching behavior. 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
Page 20
+ (L+) (≤ 100 mA) ‒ (M) ‒ (M) O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 21
Electrical values Remission min.: 0 V Remission max.: 10 V 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
Carry out the following steps based on the example of the 2P teach: Quality of Teach* Run** O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 23
No remission White Maximum remission, with glossy material 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
To leave the current menu level, press and hold the minus pushbutton for > 3 seconds. O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
To leave the current menu level, press and hold the minus pushbutton for > 3 seconds. 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
Contamination tracking Alignment Automatic function Blanking Automated Blue O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Activating or deactivating the pushbutton lock Press and hold the plus pushbutton for 10 seconds. 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
Press the SET pushbutton. Position the background under the light spot. O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 29
Dark switching Dark switching (fine / middle) (coarse) 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
Page 30
Use the plus or minus pushbutton to select AUt. O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 31
Deactivate teach-in via the control cable (ET). The teach-in process is complete. 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
Dark switching Light switching O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 33
Setting the switch-on delay Use the plus or minus pushbutton to select ton. 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
Page 34
1 – 500. Press the SET pushbutton. O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 35
Standard (factory setting) Reliable Press the SET pushbutton. 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
Page 36
Use the plus or minus pushbutton to select Pro. O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 37
Press the SET pushbutton. Use the plus or minus pushbutton to select Job. 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
Page 38
Automated (sender color selected during teach-in) Sender color red Sender color green O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 39
Use the plus or minus pushbutton to select dSP. Press the SET pushbutton. 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
In color mode, the device displays the current Quality of Run value as a digit. O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 41
Any settings made which have not been confirmed are not adopted. To quit standby mode, one of the operating keys must be pushed. 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime...
• Manual switching thresh‐ again old set incorrectly O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Only use cleaning agents suitable for the lens material. NOTE Static charge may cause dust particles to stick to the light emission window. This effect can be avoided by using an anti-static glass cleaner in combination with the SICK lens cloth (can be obtained from www.sick.com). NOTE If the light emission window is scratched or damaged (cracked or broken), the device must be replaced.
Page 44
O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
10.2 Returning devices Do not dispatch devices to the SICK Service department without consultation. NOTE To enable efficient processing and allow us to determine the cause quickly, please include the following when making a return: Details of the contact person ■...
Blanked: U < 2 V Free: U = 10 V … < U O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 47
Operation in short-circuit protected network max. 8 A From leading edge of lens 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
30.4 (1.2) Figure 13: KTX Prime Optical axis O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 49
Connector M12, mechanical stop rechts Connector M12, mechanical stop left Control panel 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
Page 50
Connector M12, mechanical stop rechts Connector M12, mechanical stop left Control panel O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
Page 51
Connector M12, mechanical stop rechts Connector M12, mechanical stop left Control panel 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
Accessories can be found on the online product page at: www.sick.com/KTS_Prime www.sick.com/KTX_Prime O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime 8020704.1E9P/2022-04-26 | SICK Subject to change without notice...
The certification is only valid with corresponding device identification on the type label of the respective device. 13.3 Licenses 8020704.1E9P/2022-04-26 | SICK O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime Subject to change without notice...
Page 54
Phone +7 495 283 09 90 E-Mail info@sick.com E-Mail office@sick.com.gr E-Mail info@sick.ru Vietnam Hong Kong Singapore Phone +65 6744 3732 Phone +852 2153 6300 Phone +65 6744 3732 E-Mail sales.gsg@sick.com E-Mail ghk@sick.com.hk E-Mail sales.gsg@sick.com Detailed addresses and further locations at www.sick.com SICK AG | Waldkirch | Germany | www.sick.com...
Need help?
Do you have a question about the KTX-WP9114125UZZZZ and is the answer not in the manual?
Questions and answers