How To Install - Britax CONVERTIBLE CHILD RESTRAINT WITH AHR Instructions For Installation And Use Manual

FOR CHILD USE (8 to 18kg)

HOW TO INSTALL

INSTALLING INTO VEHICLE (FORWARD FACING)
(UPRIGHT OR RECLINED)
WARNING: DO NOT USE RESTRAINT IN FORWARD- FACING POSITION WITH THE STABILISING BAR PULLED OUT.
Do not recline into baby position when using restraint in forward facing child use mode.
IMPORTANT: Ensure harness and headrest are in the correct position. (Refer to page 17)
A. If the Stabilising Bar is extended, unhook hook & loop
attachments and push trim away from restraint.
B. Press blue button on left side (facing seat) and gently
push stabilising bar down and then into the recessed
area.
C. Re-attach hook & loop attachments on trim.
D. Convert the restraint to child use mode by placing one hand over
rear corner of the base and lift the top end of restraint with the other
hand until audible click is heard.
18
Hook & Loop
attachments
Stabilising
Bar.
Push Stabilising Bar
Press Blue
Button