Britax CONVERTIBLE CHILD RESTRAINT WITH AHR Instructions For Installation And Use Manual page 25

SHOULDER PADS
Shoulder Pads are designed to provide extra comfort for baby or child and are easily fitted to the shoulder harness straps by:
A. Pull apart fasteners and remove shoulder pads from harness.
B. Re-fit shoulder pads to harness and attach fasteners for use.
BABY INSERT (IF FITTED)
Only use the insert when in Rearward Facing mode for babies. Discontinue use after baby reaches 10kg and over, Do not use
when in Forward Facing mode.
A. Disconnect buckle and place insert under shoulder and lap straps.
B. Attach velcro hook and loops on both sides of insert.
C. Feed the crotch strap through the flap in the baby insert and re-connect buckle.
D. Tuck the flap underneath the baby insert.
Velcro
SIDE IMPACT CUSHION TECHNOLOGY™ (IF FITTED)
Side Impact Cushions are fitted to some models and are an optional safety feature only.
VEHICLE INSTALLATION ACCESSORIES
(Available from retailers of Safe-n-Sound products)
EXTRA ANCHOR KITS: are available if using the restraint in additional vehicles.
Re-order numbers: 0038.
EXTENSION STRAPS: may be required for vehicles without a fixed parcel shelf.
Re-order numbers: 0035 (length 300 mm) 0036 (length 600 mm)
GATED 3-BAR SLIDE: for installation where the seat belt configuration does not firmly hold the child restraint.
Re-order number: 0215.
Pull crotch strap through flap
and tuck flap under Baby Insert.
ACCESSORIES
25