Britax CONVERTIBLE CHILD RESTRAINT WITH AHR Instructions For Installation And Use Manual page 14

FOR BABY USE (BIRTH TO 12kg)
HOW TO USE
Make sure that nothing is obstructing harness straps and that baby's arms and legs are free.
Do not use restraint if straps do not tighten and contact Safe-n-Sound or Britax Childcare Customer Service.
H. Tighten Adjustable Upper Anchorage Strap by pulling
Adjustment Strap to remove slack as shown.
IMPORTANT: The Baby Insert Pad is designed to snugly support baby for extra support and comfort and
must be used for smaller babies, less than 10kg. Discontinue use if Baby Insert Pad creates discomfort for larger
babies or once baby reaches 10kg.
REMOVING BABY FROM RESTRAINT
A. Press Upper Anchorage Strap Adjuster Button while pulling Upper Anchorage Straps to slacken. Allow
Upper Anchorage Straps to fall to the sides for easy access into restraint.
B. Push and hold the Harness Adjustment Button while pulling both Shoulder Harness Straps to slacken
harness to the desired amount.
C. Press red button on Harness Buckle then both Harness Tongues will be released. Move each shoulder
strap to baby's side then pick up baby.
14
A
Pull Adjustment
Strap to remove slack
Storage
Strap