Britax CONVERTIBLE CHILD RESTRAINT WITH AHR Instructions For Installation And Use Manual page 23

REGULAR CARE OF THIS RESTRAINT:
Please check the following items regularly to ensure the safety of your child:
A. Check the webbing for fraying.
B. Check that the buckle clicks and is not sluggish or sticky in operation.
C. Ensure there are no cracks in moulding or the plastic moulding.
D. Check the harness adjuster is operating and is clamping the webbing.
E. If any part of the restraint is cracked or broken, seek repair immediately or replace the child restraint.
TO CLEAN HARNESS BUCKLE:
If sticky liquids such as baby formula, fruit juice, etc. get inside your Harness Buckle, it may become sluggish. An indication of
a sluggish Harness Buckle is that you cannot hear a click when engaging the Harness Tongues. To restore the Harness Buckle to
good working order it needs to be cleaned as follows:
A. From the underside of the restraint pull each crotch 3-bar slide then turn 3-bar slide and push through each
slot to remove the Harness Buckle from the restraint.
B. Place the Harness Buckle under warm (max. 40 degrees Celsius) running water as shown below. Let the
water run through the mouth of the buckle for five minutes.
C. Engage and disengage the Harness
Tongues and Buckles several times
until a strong audible click is heard.
Cover
Body
3-bar
slide
D. If you still cannot hear a strong audible click after
engaging the Harness Tongues & Buckle,
then repeat cleaning several times. If the
Harness Buckle cannot be returned to its original
working condition then contact Safe-n-Sound or
Britax Childcare Customer Service.
E. Refit the harness buckle to the restraint with the red button
facing out & feeding each 3-bar slide through appropriate
slot.
CARE & MAINTENANCE
Click
23