Care And Maintenance - Britax CONVERTIBLE CHILD RESTRAINT WITH AHR Instructions For Installation And Use Manual

CARE & MAINTENANCE
The restraint has a flame retardant cover which is removable for cleaning. Cleaning instructions are on the care label attached to
the cover. If fluffy cover is fitted then washing cover prior to use will remove excess fluff. Ensure that the inside of the buckle is
free of foreign matter. Cleaning instructions for the buckle are on page 27. Use only mild soap and water to clean all metal and
plastic parts of the restraint. Do not use chemicals or cleaning agent. Do not pull sticky items from covers as the cover may be
damaged - soak in water and gently remove.
COVER (STYLE MAY VARY)
The cover has been designed to protect your child when seated in the restraint. Care should be taken if children either eat or
drink while in the restraint as some food or drink products may cause damage or marking to the cover.
TO REMOVE COVER:
A. Remove the restraint from vehicle.
B. Disengage harness tongues from harness buckle.
D. Remove any accessories.
E. Remove headrest cover and seat cover as follows.
F. Unhook the cover at the top and bottom of the restraint. Peel cover from
outer rim of the body starting from on both sides and at , at the
top. Refer to drawing below and at Push button .
G. Remove the cover while feeding Crotch Buckle, Harness Tongues and
strap through the lap and crotch strap slots in the cover.
Note: If the restraint is fitted with Side Impact Cushion, the headrest trim has elastic
which pulls over the Side Impact Cushion that can be easily removed and replaced.
TO REPLACE COVER:
A. Feed the Harness Tongues & shoulder straps through Lap strap
slots and matching shoulder strap slots in the cover.
B. Stretch cover over the top of the restraint first at , then the sides
A
at and then stretch the cover around the rim of the restraint.
C. Re-fit the Seat Cover attachments.
D. Feed Crotch Buckle through slots in cover
E. Ensure trim is stretched over Push Button housing and ensure none of the harness straps are twisted.
F. Fit headrest cover over headrest and feed harness thru slots in cover.
G. Refit baby insert if required.
22
A
C
B
C
Shoulder Strap Slots
in Headrest Cover
B
Side Impact Cushion™
Protection
B
A
C
A