1. Manuals
  2. Brands
  3. PLANEPRINT Manuals
  4. Toy
  5. LEARJET 35
  6. Assembling manual

PLANEPRINT LEARJET 35 Assembling Manual

Twin-engine rc business jet
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Twin-engine RC business jet
NOTE:
Slicing works best
with CURA!
www.planeprint.com
the ONLY place where you can get
original Planeprint STL fi les legally!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LEARJET 35 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for PLANEPRINT LEARJET 35

Summary of Contents for PLANEPRINT LEARJET 35

  • Page 1 Twin-engine RC business jet www.planeprint.com NOTE: Slicing works best the ONLY place where you can get with CURA! original Planeprint STL fi les legally!
  • Page 2 LW-PLA OTHER PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 3 Two normal and one steerable Nose Wheel (we used: 40g Landing Gear, AliExpress – for 3.500g Models) We recommend ordering replace- 33 mm ment bolts at the same time. Ø 4 mm PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 4 • Tinted fi lm for rear car lights (optional) Tools Cutter knife, small Philips screwdriver, Sandpaper grain ~150, Rod connection hole 1 to 2mm Ø Metal saw, Needle nose pliers Ball bearings 9 mm Threaded insert PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 5 This manual is constantly being improved and supplemented, we recommend downloading the latest version from our website before building. To print all PLANEPRINT models you need to set some basic profiles in Cura (If you use another slicer, please set the same parameters).
  • Page 6 Please note the additional settings for the individual parts! P1_Antennas_lj.stl MATERIAL PLA, Weight: ~ 6 g ADDITIONAL SETTINGS None required P1_Doors front gear_lj.stl MATERIAL PLA, Weight: ~ 8 g ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 7 Please note the additional settings for the individual parts! P1_Doors front mount_lj.stl MATERIAL PLA, Weight: ~ 5 g ADDITIONAL SETTINGS None required P1_Doors front Servo mount_lj.stl MATERIAL PLA, Weight: ~ 5 g ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 8 Please note the additional settings for the individual parts! P1_Hinges AIL_lj.stl MATERIAL PLA, Weight: ~ 7 g ADDITIONAL SETTINGS None required P1_Hinges ELE_lj.stl MATERIAL PLA, Weight: ~ 2 g ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 9 PLA, Weight: ~ 10 g ADDITIONAL SETTINGS None required P1_Landing Light glass_lj.stl MATERIAL PLA, Weight: ~ 1 g ADDITIONAL SETTINGS None required Use transparent filament For optimum printing, transparent filaments should always be dried. PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 10 PLA, Weight: ~ 1 g ADDITIONAL SETTINGS None required P1_Light_lj.stl MATERIAL PLA, Weight: ~ 1 g ADDITIONAL SETTINGS • print it four times Use transparent filament For optimum printing, transparent filaments should always be dried. PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 11 ADDITIONAL SETTINGS • Print 3 times Use transparent fi lament For optimum printing, transparent fi laments should always be dried. P1_Parts_lj.stl MATERIAL PLA, Weight: ~ 1 g ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 12 Please note the additional settings for the individual parts! P1_Servo mount RUD ELE_lj.stl MATERIAL PLA, Weight: ~ 8 g ADDITIONAL SETTINGS None required P1_Servo mount wing_lj.stl MATERIAL PLA, Weight: ~ 14 g ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 13 Please note the additional settings for the individual parts! P1_T-Connects small_lj.stl MATERIAL PLA, Weight: ~ 3 g ADDITIONAL SETTINGS None required P1_T-Connects_lj.stl MATERIAL PLA, Weight: ~ 5 g ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 14 Please note the additional settings for the individual parts! P1_Windshield L_lj.stl P1_Windshield R_lj MATERIAL PLA, Weight: ~ 1 g ADDITIONAL SETTINGS None required P1_Wing Fence_lj.stl MATERIAL PLA, Weight: ~ 10 g ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 15 Please note the additional settings for the individual parts! P2_Battery mount_lj.stl MATERIAL PLA, Weight: ~ 7 g ADDITIONAL SETTINGS None required P2_Battery plate_lj.stl MATERIAL PLA, Weight: ~ 25 g ADDITIONAL SETTINGS • use brim PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 16 P2_AIL covers_lj.stl MATERIAL PLA, Weight: ~ 5 g ADDITIONAL SETTINGS • Wall Line Count/Perimeters: 1 • Infill: 8 % P2_Cover lock_lj.stl MATERIAL PLA, Weight: ~ 4 g ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 17 Tough PLA, Weight: ~ 7 g ADDITIONAL SETTINGS • Wall Line Count/Perimeters: 4 • Top Layers: 4 • Bottom Layers: 4 * With holes for threaded inserts (better solution) ** With holes for Screws Ø3mm PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 18 ** With holes for Screws Ø3mm ** With holes for Screws Ø3mm Remove support. Please be careful with the knife! P2_Gear mount main_lj.stl MATERIAL Tough PLA, Weight: ~ 13 g ADDITIONAL SETTINGS • print twice PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 19 Please note the additional settings for the individual parts! P2_Gear mount nose_lj.stl MATERIAL Tough PLA, Weight: ~ 15 g ADDITIONAL SETTINGS None required P2_Parts_lj.stl MATERIAL PLA, Weight: ~ 8 g ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 20 Please note the additional settings for the individual parts! P2_Rim main_lj.stl MATERIAL PLA, Weight: ~ 7 g ADDITIONAL SETTINGS • Print it four times P2_Rim nose_lj.stl MATERIAL PLA, Weight: ~ 7 g ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 21 Please note the additional settings for the individual parts! P2_Rudder mount_lj.stl MATERIAL PLA, Weight: ~ 2 g ADDITIONAL SETTINGS None required P2_Window strut_lj.stl MATERIAL PLA, Weight: ~ 3 g ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 22 Please note the additional settings for the individual parts! P2_Wing mount_lj.stl MATERIAL PLA, Weight: ~ 5 g ADDITIONAL SETTINGS None required P2_Carbon tool 10mm.stl and P2_Carbon tool 6mm.stl MATERIAL ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 23 • Bottom Layers: 5 • Infill Density: 10 % • Infill Pattern: Gyroid TPU A95: • Wall Line Count: 3 • Top Layers: 3 • Infill Density: 6 % • Infill Pattern: Gyroid PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 24 The information about the basic settings you can find on our website at PRINT. Please note the additional settings for the individual parts! P4_Tension belt_lj.stl MATERIAL TPU, Weight: ~ 4 g ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 25 LW PLA, Weight: ~ 45 g TIME ~ 9 hours ADDITIONAL SETTINGS None required P5_Cover 2_lj.stl MATERIAL LW PLA, Weight: ~ 49 g TIME ~ 10 hours ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 26 TIME ~ 2 hours 10 minutes ADDITIONAL SETTINGS • use brim P5_Elevator L1_lj.stl P5_Elevator R1_lj.stl MATERIAL LW PLA, Weight: ~ 12 g TIME ~ 2 hours ADDITIONAL SETTINGS • use brim PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 27 LW PLA, Weight: ~ 7 g TIME ~ 1 hour ADDITIONAL SETTINGS None required P5_Elevator L+R3_lj.stl MATERIAL LW PLA, Weight: ~ 1 g TIME ~ 15 minutes ADDITIONAL SETTINGS • Print twice PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 28 LW PLA, Weight: ~ 5 g TIME ~ 50 minutes ADDITIONAL SETTINGS None required P5_Flap L2_lj.stl P5_Flap R2_lj.stl MATERIAL LW PLA, Weight: ~ 5 g TIME ~ 40 minutes ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 29 LW PLA, Weight: ~ 7 g TIME ~ 1 hour ADDITIONAL SETTINGS None required P5_Flap L4_lj.stl P5_Flap R4_lj.stl MATERIAL LW PLA, Weight: ~ 6 g TIME ~ 1 hour ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 30 LW PLA, Weight: ~ 41 g TIME ~ 8 hours ADDITIONAL SETTINGS None required P5_FUS 2_lj.stl MATERIAL LW PLA, Weight: ~ 80 g TIME ~ 17 hours ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 31 ~ 10 hours ADDITIONAL SETTINGS None required P5_FUS 4_lj.stl MATERIAL LW PLA, Weight: ~ 66 g TIME ~ 13 hours ADDITIONAL SETTINGS None required Remove support. Please be careful with the knife! PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 32 TIME ~ 12 hours ADDITIONAL SETTINGS None required P5_FUS 5b L_lj.stl P5_FUS 5b R_lj.stl MATERIAL LW PLA, Weight: ~ 10 g TIME ~ 1 hour 10 minutes ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 33 LW PLA, Weight: ~ 78 g TIME ~ 18 hours ADDITIONAL SETTINGS None required P5_FUS 6b_lj.stl MATERIAL LW PLA, Weight: ~ 2 g TIME ~ 15 minutes ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 34 LW PLA, Weight: ~ 47 g TIME ~ 9 hours ADDITIONAL SETTINGS None required Unfortunately, stringing is unavoidable with this part and it has to be reworked a little with a knife and sandpaper. PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 35 LW PLA, Weight: ~ 1 g TIME ~ 4 minutes ADDITIONAL SETTINGS None required Unfortunately, stringing is unavoidable with this part and it has to be reworked a little with a knife and sandpaper. PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 36 LW PLA, Weight: ~ 10 g TIME ~ 2 hours ADDITIONAL SETTINGS None required P5_FUS 9b_lj.stl MATERIAL LW PLA, Weight: ~ 6 g TIME ~ 1 hour ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 37 LW PLA, Weight: ~ 3 g TIME ~ 40 minutes ADDITIONAL SETTINGS None required P5_FUS 9d_lj.stl MATERIAL LW PLA, Weight: ~ 4 g TIME ~ 48 minutes ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 38 LW PLA, Weight: ~ 24 g TIME ~ 4 hours ADDITIONAL SETTINGS None required P5_HS L2_lj.stl P5_HS R2_lj.stl MATERIAL LW PLA, Weight: ~ 11 g TIME ~ 1 hour 30 minutes ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 39 LW PLA, Weight: ~ 23 g TIME ~ 4 hours ADDITIONAL SETTINGS None required P5_Nacelle L1_lj.stl P5_Nacelle R1_lj.stl MATERIAL LW PLA, Weight: ~ 14 g TIME ~ 2 hours ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 40 LW PLA, Weight: ~ 30 g TIME ~ 5 hours ADDITIONAL SETTINGS None required P5_Nacelle L3_lj.stl P5_Nacelle R3_lj.stl MATERIAL LW PLA, Weight: ~ 20 g TIME ~ 3 hours ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 41 P5_Rudder2_lj.stl MATERIAL LW PLA, Weight: ~ 6 g TIME ~ 1 hour ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 42 LW PLA, Weight: ~ 22 g TIME ~ 3 hours 20 minutes ADDITIONAL SETTINGS None required P5_Stand2_lj.stl MATERIAL LW PLA, Weight: ~ 22 g TIME ~ 3 hours 20 minutes ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 43 LW PLA, Weight: ~ 3 g TIME ~ 15 minutes ADDITIONAL SETTINGS • Wall Line Count/Perimeters: 2 P5_Tank L1_lj.stl P5_Tank R1_lj.stl MATERIAL LW PLA, Weight: ~ 20 g TIME ~ 4 hours ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 44 LW PLA, Weight: ~ 35 g TIME ~ 7 hours ADDITIONAL SETTINGS None required P5_Tank L3_lj.stl P5_Tank R3_lj.stl MATERIAL LW PLA, Weight: ~ 18 g TIME ~ 3 hours 20 minutes ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 45 LW PLA, Weight: ~ 45 g TIME ~ 7 hours 30 minutes ADDITIONAL SETTINGS None required P5_Wing L2_lj.stl P5_Wing R2_lj MATERIAL LW PLA, Weight: ~ 75 g TIME ~ 12 hours ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 46 Print only one STL at a time! P5_Wing L3_lj.stl P5_Wing R3_lj MATERIAL LW PLA, Weight: ~ 40 g TIME ~ 7 hours ADDITIONAL SETTINGS None required PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...

  • Page 47: Basic Information

    The remaining top surface is about 1 mm thick. To compensate for this, you can move the new part to be printed down the Z axis in Cura by 1 mm. Glue joint Broken part Glue joint PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...

  • Page 48: Fuselage Assembly

    P5_FUS 2_lj.stl without applying much pressure. The edge of the window must remain! You can also simply paint it. Carbon rods Ø3*100mm P2_Gear mount nose_lj.stl Carbon rods Ø3*260mm PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 49 P2_Rudder mount_lj.stl P5_FUS 8c_lj.stl P5_Wing R1_lj.stl P1_Parts_lj.stl P1_Parts_lj.stl P5_Wing L1_lj.stl Carbon rods Ø3*1000mm, 3 pieces PLANEPRINT LEARJET 35 PLANEPRINT LEARJET 35 PLANEPRINT LEARJET 35 PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL PRINTING & ASSEMBLING MANUAL © PLANEPRINT © PLANEPRINT...

  • Page 50: Elevator Assembly

    No glue in P1_Hinges ELE_lj.stl the hinges! P5_Elevator L2_lj.stl P5_FUS 9d_lj.stl The cover is only screwed on. P1_Rear Light_lj.stl Steel wire Ø1*272mm 2 pieces PLANEPRINT LEARJET 35 PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL PRINTING & ASSEMBLING MANUAL © PLANEPRINT © PLANEPRINT...

  • Page 51: Elevator Servo

    Make sure that the hole of the rod connection is exactly in the center! Position the two elevators exactly the same and fi x the two linkages with the rod connection. PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...

  • Page 52: Rudder Assembly

    Insert the steel wire into the bowden in the fuselage. The back cover is P5_FUS 8b_lj.stl P2_Rudder mount_lj.stl only screwed on. P1_Parts_lj.stl PLANEPRINT LEARJET 35 PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL PRINTING & ASSEMBLING MANUAL © PLANEPRINT © PLANEPRINT...

  • Page 53: Rudder Servo

    The rotary lever must not be glued on and moves the steel wires for the lock. There are slots for 5 mm neodymium magnets, but these are optional and not necessary. P2_Cover lock_lj.stl PLANEPRINT LEARJET 35 PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 54 EDF Nacelle P1_T-Connects small_lj.stl P5_Nacelle L2_lj.stl P5_Nacelle L3_lj.stl P5_Nacelle L1_lj.stl P2_Parts_lj.stl Cut a hole here for the EDF cables. Carbon rod Ø3*185mm Carbon rod Ø3*158mm PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...

  • Page 55: Nose Landing Gear

    Position the servo for steering exactly at the height that the linkage runs horizontally as shown in the picture. Use this part as a spacer if your servo has different dimensions. Metal screws Ø3mm PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 56 2 and secured with the two tapping screws only (NOT glued). The steering servo must be loosened again slightly and the retract removed. PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 57 To do this, you must program a sequence on your remote control. You can also omit the doors if this is too complicated for you or if you have too few channels available on the receiver. PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...

  • Page 58: Main Landing Gear

    Secure the metal screws with a drop of CA glue P4_Wheel main_lj.stl Metal screw Ø4*50mm P2_Rim main_lj.stl P1_Parts_lj.stl Ball bearings NOTE The side with the screw heads must be on the inside! PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 59 You need a one to three cable to connect the three retracts with one channel. P2_Gear mount main_lj.stl P2_Doors1 main gear_lj.stl P2_Door parts_lj.stl Retract Tapping screw Ø2mm Screw Ø3mm Screw Ø3mm PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...

  • Page 60: Wing Assembly

    P1_Wing Fence_lj.stl P5_Wing L3_lj.stl P5_Wing L2_lj.stl P1_T-Connects_lj.stl P2_Parts_lj.stl P2_Parts_lj.stl P2_AIL covers_lj.stl Carbon tube Ø6*377mm P1_Servo mount wing_lj.stl Steel wire Ø1*165mm P5_AIL L_lj.stl P1_Hinges AIL_lj.stl No glue in the hinges! Steel wire Ø1*58mm PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 61 P1_T-Connects_lj.stl P5_Tank L3_lj.stl P1_Light_lj.stl P5_Tank L2_lj.stl P5_Wing L2_lj.stl P5_Tank L1_lj.stl P1_Rear Light_lj.stl P1_Rear Light_lj.stl Flap assembly P1_Hinges Flap_lj.stl P5_Flap L1_lj.stl P5_Flap L2_lj.stl PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 62 P5_Wing L2_lj.stl P1_Hinges Flap_lj.stl Metal screw Ø3mm P1_Servo mount wing_lj.stl P4_Tension belt_lj.stl This connecting tab is attached to the fl ap on the fuselage when mounting the wing. Steel wire Ø1*67mm PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 63 TPU belts on this central part. EDF mount EDF mount P5_Nacelle Cover L_lj.stl The EDF must be fl ush at the front! The EDF must be fl ush at the front! PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 64 Start at the rear edge as shown in the picture. Finally, glue the window strut in place. Stand P5_Stand1_lj.stl P5_Stand2_lj.stl The rear part must be turned correctly! Carbon tube Ø6*500mm PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 65 The aircraft must balance on these points. Make sure that the model is balanced horizontally and never tilts backwards! For the Maiden it is better to put the CG 5 to 10 mm forward. PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...

  • Page 66: Technical Specifications

    1440 mm/56.7 inches 1440 mm/56.7 inches LENGTH 1716 mm/67.5 inches 1716 mm/67.5 inches FLIGHT WEIGHT 3900 grams (6S 5000 mAh battery) 3900 grams (6S 5000 mAh battery) WING LOAD 81 g/dm 81 g/dm PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...

  • Page 67: Control Direction Test

    The fl aps must be aligned exactly the same in every position, otherwise the aircraft will not fl y straight! (for some remote EXPO ELEVATOR 30 % controls a minus has to be in front AILERON 30 % of the number) RUDDER 30 % PLANEPRINT LEARJET 35 PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 68 3D printing Always keep the transmitter switched on when the model will not be replaced by PLANEPRINT.com in any way. is switched on. When operating, always keep a safe distance from your Always remove the battery before disassembling the model.

Table of Contents