Installing The System Into A Rack; Identifying The Sections Of The Rack Rails - Supermicro SUPERSERVER 1015B-3 User Manual

S S
UPER ERVER 1015B-3 Manual
2-4

Installing the System into a Rack

This section provides information on installing the SuperServer 1015B-3 into a rack.
If the system has already been mounted into a rack, you can skip ahead to Sections
2-5 and 2-6. Note: This rail will fi t a rack between 26" and 33.5" deep.
There are a variety of rack units on the market, which may mean the assembly
procedure will differ slightly. The following is a guideline for installing the 1015B-3
into a rack with the rack rails provided. You should also refer to the installation
instructions that came with the rack unit you are using.

Identifying the Sections of the Rack Rails

The chassis package includes two rack rail assemblies in the rack mounting kit.
Each assembly consists of two sections: an inner fi xed chassis rail that secures
directly to the server chassis and an outer fi xed rack rail that secures directly to
the rack itself.
Figure 2-1. Identifying the Sections of the Rack Rails
Inner Rail
Extensions
Inner Rails (preinstalled)
2-4