Installing The System Into A Rack; Identifying The Sections Of The Rack Rails - Supermicro SUPER SUPERSERVER 6027PR-HTR User Manual

SuperServer 6027PR-HC0(R/TR/FR) User's Manual
2-4

Installing the System into a Rack

This section provides information on installing the chassis into a rack unit with the
rails provided. There are a variety of rack units on the market, which may mean
that the assembly procedure will differ slightly from the instructions provided. You
should also refer to the installation instructions that came with the rack unit you are
using. Note: This rail will fit a rack between 26.5" and 36.4" deep.

Identifying the Sections of the Rack Rails

The chassis package includes two rail assemblies. Each assembly consists of three
sections: An inner rail that secures directly to the chassis, an outer rail that secures
to the rack, and a middle rail which extends from the outer rail. These assemblies
are specifically designed for the left and right side of the chassis.
Rail Assembly
(Shown with Rails
Retracted)
This Side Faces
Figure 2-1. Identifying the Outer Rail, Middle Rail and Inner Rail
Outward
(Left Rail Assembly Shown)
2-4
Outer Rail
Middle Rail
Locking Tab
Inner Rail