Icom IC-SAT100M Operating Manual page 26

6
SPECIFICATIONS AND OPTIONS
Specifications
L All stated specifications are subject to change without notice or obligation.
D General
• Frequency range:
• Number of channels:
• Type of emission:
• Duplexing method:
• Multiplexing method:
• Antenna impedance:
• Output impedance (audio):
• Operating temperature range: –30˚C ~ +60˚C, –22˚F ~ +140˚F
• Power supply voltage:
• Power Over Ethernet
• Current drain:
• Dimensions (approximate)*:
• Weight (approximate):
D Transmitter
• Output power:
• Modulation:
• Channel spacing:
• Frequency stability:
• Spurious emissions:
• Audio harmonic distortion:
D Receiver
• Sensitivity:
• Audio output power
(At 5% distortion):
* Projections not included.
1616 ~ 1626.5 MHz
240 Channels
41K7Q7W
TDD (Time Domain Duplex)
TDMA/FDMA
50 Ω nominal
4 Ω
10.5 to 32 V DC nominal
Negative ground
IEEE 802.3at standard: 25 W maximum for PD (Powered device),
Receive stand-by (Digital Mode): 550 mA
Receive max.audio:
Transmit High (7W):
Main unit:
Command Microphone: 59.5 (W) × 134.6 (H) × 30.1 (D) mm,
Antenna unit:
Main unit:
Main unit + Microphone:1.2 kg, 2.6 lb
Antenna unit:
7.0 W maximum
DE-QPSK/DE-BPSK
41.667 kHz
±1.5 ppm
0.25 μW (1 GHz or less)
1.0 μW (More than 1 GHz)
0.8% typical (at AF 1 kHz)
–115 dBm typical
1.5 W (Typical) into an 8 Ω load (Internal speaker)
4.0 W (Typical) into an 4 Ω load (External speaker)
30 W maximum for PSE (Power sourcing equipment)
800 mA (Internal Speaker), 1.1 A (External Speaker)
Less than 2.5 A, Average 0.7 A
125 (W) × 29 (H) × 156.5 (D) mm,
(4.9 (W) × 1.1 (H) × 6.2 (D) inches)
(2.3 (W) × 5.3 (H) × 1.2 (D) inches)
76.8 (W) × 200 (H) × 76.8 (D) mm,
(3.0 (W) × 7.9 (H) × 3.0 (D) inches)
0.95 kg, 2.1 lb
0.6 kg, 1.3 lb
23