Moog MEMORYMOOG 345 Owner's And Service Manual page 46

Sample and hold will randomly percolate. Again, experiment with different modulation speeds,
waveshapes, and different amounts of modulation. Try modulation with a high FILTER EMPHASIS
setting. Change the CUTOFF. Remember, it's possible to open the CUTOFF control so far that you
won't hear any modulation effect. If you start adding CONTOUR shapes to the FILTER while it's
being modulated from the LFO or some other source (such as a voltage pedal), it's possible to drive
the CUTOFF frequency so high that you won't hear any modulation. If, in your fiddling around with
knobs and dials, you suddenly get no modulation, turn the CUTOFF control counterclockwise. If
that doesn't help, make sure you've turned up one of the three possible MODULATION AMOUNT
controls (the MODULATION WHEEL [2.3], the MODULATION AMOUNT control [1.11], and/or
PROGRAMMABLE FOOTPEDAL # 2 [4.2]).
LFO FILTER MODULATION
DIFFERENT WAVESHAPES. WILL LET YOU HEAR THE DIFFERENT WAVESHAPES
\ FROM THE LFO AS THEY MODULATE THE FILTER.
VOLTAGE CONTAGLLEO FILTER
MODULATION
*. so 6 eens
noo
N
Ot
CUTOFF
<
nae wz)
DESTINATION nog
Pw2 Pw3 FILTER
RETURN UNCONDITIONAL. SKEV BOARD: RELEASE
To ZERO pees FOLLOW
o Ww
FILTER CONTOUR
so PAID ohice Mz, wA\iLe
4 wg = # cs e: o a6 S
DESTINATION
IMSEC 10SEC aan 2MSEC 20SEC
AC! 1o aly
SuTCH BEND,
Litera
VOLTAGE Gcnricaans AMPLIFIER
<—— FOOTPEDAL
CONTROLLER
EXPERIMENT WITH TURNING LFO MODULATION
ON AND OFF WITH THESE CONTROLS.
Some rules of thumb about modulation:
42