Compaq 3000R - ProLiant - 128 MB RAM Notice page 36

7. At the command prompt type help and proceed to achieve your objective.
8. Type "exit" when done troubleshooting.
Installing RC
1. Insert Windows 2000 CD-ROM. If CD-ROM auto-start is enabled, click exit to close
the applet.
2. Open a command prompt and type D:\I386\WINNT32 /CMDCONS <ENTER>
(Where D: is the CD-ROM drive letter.)
3. Follow the screen instructions to complete the RC installation.
Booting RC
1. Shutdown and Restart system.
2. Select "Windows 2000, Recover Console" from the boot menu.
3. The system will display a menu asking to select the instance of the NOS you want to
boot. For example it displays:
1: C:\WINNT
4. Type 1 <ENTER>
5. Type the administrator password when prompted.
6. At the command prompt type help and proceed to achieve your objective.
7. Type "exit" when done troubleshooting.
NOTE: The file access security can prevent you from getting to files.
Tip #18. Installing the HP NetRaid-4M Drivers when Upgrading to
Windows 2000
Refer to the HP NetRaid-4M "User's Guide" for information on how to installing the
drivers when upgrading to Windows 2000 for a HP NetRaid-4M adapter.
Tip #19. Page Address Extension /PAE not added by Windows 2000
DataCenter installer
If your system has more than 4G of RAM edit boot.ini file to add /PAE switch at the end
of the operating system string, i.e. the operating system string that declares Microsoft
Windows 2000 DataCenter Server.
For example: