Compaq 3000R - ProLiant - 128 MB RAM Notice page 34

11. Open "Drive A:\" folder.
12. Open the "w2kvp" folder.
13. Double click "w2kvp.reg". (You may not see the file extension depending upon how
you have your system configured.)
14. Click Yes at the popup dialog box to confirm the registry changes.
15. Click OK to finish the registry update.
16. Remove the diskette and perform a
17. Shutdown, Restart.
18. Let the system boot as usual and login.
19. Insert the M F
ETA
M F Setup from the list of on screen options.
ETA RAME
20. Refer to the M
ETA
setup.
21. Implement Tip #18 to install the Windows 2000 Recovery Console to enhance the
system's configuration.
Tip #17. Windows 2000 Recovery Options
In the event that the current installation of Windows 2000 fails to boot (this might happen
after installing a new driver, component, software, etc), Windows 2000 provides the
following recovery options to help you gain access to your windows 2000 installation to
replace damaged files and services for troubleshooting purpose.
It is recommended that you install the Recovery Console as listed on this document to
enhance the system configuration.
Last known good configuration
Activated by pressing F8 during the system process of Windows 2000 and selecting "Last
Known Good Configuration" from the menu.
This boot mode is used in the case that the system fails to boot after installing a new
software or driver. The system will use the previous registry setting to initialize and boot
the system.
Safe Mode Boot
Activated by pressing F8 during the system boot. It provides minimal configuration with
required drivers and services. The safe mode boot provides three options:
Version 1.8 for Windows 2000 CD-ROM and choose
RAME
F Installation Guide and to complete the installation and
RAME