Compaq 3000R - ProLiant - 128 MB RAM Notice page 33

Overview
This application note describes how to install Citrix M
Windows 2000 Advanced Server on an HP NetServer
Software Requirements
· Microsoft Windows 2000 Advanced Server
· M
F Version 1.8 for Windows 2000
ETA RAME
· HP Navigator CD-ROM
Pre-installation Steps
1. Verify the system bios and if necessary update to latest revision.
2. Before you begin the installation of Windows 2000 on the LT 6000r, create the
"Windows 2000 Drivers Diskette." (Created from HP Navigator CD-ROM)
If you do not have the HP Navigator CD-ROM you can download the necessary file from
their website: http://www.hp.com/country/us/eng/supportservices.htm
Windows 2000 and MetaFrame Installation
1. Insert Windows 2000 Advanced Server CD-ROM into the CD-ROM drive and power
up the machine.
2. When prompted, press any key to boot from the Windows 2000 CD.
3. Refer to the Microsoft Windows 2000 Server Installation Guide to complete the
installation.
4. On the first boot of the system following the completion of the installation of
Windows 2000, shut the system down by pressing CTL-ALT-DEL, use the right
arrow key to select "shutdown". DO NOT USE THE MOUSE DURING THE
SHUTDOWN PROCESS AS IT COULD CAUSE YOUR SYSTEM TO HANG.
5. When the system reboots press F8 at the start of the Windows 2000 boot sequence.
6. Select "Enable VGA mode" from the choices listed on the display.
7. When prompted to login, press CTL-ALT-DEL and login as administrator.
8. (You can use the mouse while you are running in VGA mode.)
9. Insert the Windows 2000 driver diskette that you created earlier.
10. Open the "My Computer" folder.
F 1.8 and Microsoft
ETA RAME
server.
LT 6000