Compaq 3000R - ProLiant - 128 MB RAM Notice page 15

3. Click Next at the "Domain Controller Type" to accept default "Domain Controller for
a new Domain" radio button enabled.
4. Click Next at the "Create Tree or Child Domain" to accept default "Create a new
domain tree" radio button enabled.
5. Click Next at the "Create or Join Forest" to accept default "Create a new forest of
domain trees" radio button enabled.
6. At the text box for "Full DNS name for new domain:" type in the assigned DNS name
for your server (for example: hostname.com).
7. Click Next. The system will take a few minutes with the hour clock on the display
before moving to next screen.
8. Click Next at the "NetBIOS Domain Name" dialog box to accept default "Domain
NetBIOS name:"
9. Click Next to accept "Database and Log Locations" default values:
Database Location: C:\WINNT\NTDS
Log Location: C:\WINNT\NTDS
10. Click Next to accept default "Shared System Volume".
Folder Location: C:\WINNT\SYSVOL
11. The system will display a dialog box that reads "The Wizard can not contact the DNS
Server...." Confirm your DNS configuration, or install and configure a DNS server
on this computer. Click OK.
12. Click the Yes, Install and config DNS on this computer radio button for this
choice. Click Next.
13. Click the Permissions compatible with pre Windows2000 Server radio button.
Click Next to continue.
14. Enter the Administrator password and click <Next>.
15. Review the Summary display and click Next to continue.
16. The system will start configuring the active directory display. It shows an animation
of a pencil writing on a note pad. This will take a few minutes to complete..
17. If prompted, insert Windows 2000 CD-ROM and click OK to continue.
18. Configuring active directory display shows again. Click Finish to close the Wizard
utility. This completes the active directory installation.